Main Menu
FDM
- 3 Color Cetus2 Print
- A Little Bit of Junque
- A Return to ABS
- Am I Stuck?
- ASA (acrylic styrene acrylonitrile)
- Big Mama Cetus Lives!
- Big MamaCetus (BMC)
- Can CETUS2 TPU?
- Cetus and PETG
- Cetus MK3 Conversion
- Cetus2
- Cetus2 Brackets
- Cetus2 Color Use
- Cetus2 Expectations
- Cetus2 Extruder Repair
- Cetus2 Feed Guides
- CETUS2 Grass Bowl
- CETUS2 UPS3 3.2.5 Update
- CETUS2 Velocity Stacks
- Chair Leg Booties
- Color Change
- Deeper Into the Shadows
- Even More Cetus2 Prints
- First Impression Simplify3Dv5
- First PETG on Cetus2
- Glass Print Bed with Aqua Net
- Hiding in the Shadows
- High Resolution FDM
- Houston, we have a problem.
- Just Coasting
- Kickstart the Cetus2
- MamaCetus
- MayDay CETUS2
- More Cetus2 First Prints
- More CETUS2 User Thoughts
- My First Cetus2 Print
- Nozzle Change
- Nozzle Size 0.60mm
- Ode to Purge
- On The Fly
- Open Letter to Tiertime Cetus2
- Oreo Project
- Practical CETUS2 Project
- Print Big or Go Home
- Print2Cast Wax Filament Received
- Printing WAX
- Production CETUS2
- Retraction
- Secret Code in CETUS2
- SIDs or SUDz
- The Big Ugly
- The Elephant and the Bear
- Three Color Printing
- Tiertime Cetus MK3 Fail
- Tiertime Cetus2 is a WINNER!
- Tweety-Pie on Cetus2
- Two Color 3D Printing
- Two Color Blend
- UPStudio3 V3.2.5
- Working with TPU
- Z Axis Deflection Facts
Here are a couple (or more) of big item prints I have designed.
The tissue box I designed for my own office. The olive green one. Then I noticed a new but bare tissue box out in the music room where my wife provides piano lessons. Thus the white-ish box was born. When she noticed the new boxes, she immediately wanted several more made. Number 5 is on the Mamacetus printer as I write this. Print time per box is over 12 hours.
Next project is what I call a K-cup stackable pod rack. There are three here holding 27 pod cups. Less space by about 1/3 of the rotating wire rack I have been using and holding 3 more pods Another rack on top of these would equal the height of the wire rack. So 12 more pods in the same space. It's also a good excuse to design/print something.